| Model | TZ-400 | TZ-500 |
| Engine Power | 8.5kw | 10kw |
| Cutting Width | 5mm | 6mm |
| Cutting Depth | 180mm | 200mm |
| Slice Diameter | 400mm | 500mm |
| Weight | 130kg | 150kg |
Application of Pavement Cutting Machine
The road-cutting machine is widely used in the cutting of asphalt, cement pavement, concrete products, stone, etc. in many industries such as municipal, construction, building materials, highways, bridges, tap water, thermal pipelines, airport construction, etc.
The road-cutting machine is specially designed to provide professional cutting for on-site operations such as municipal construction re-election, road maintenance and construction, airport road cutting, communication engineering burying, floors, and driveways. Different types of saw blades can be replaced during use, which can effectively cut new and old concrete and asphalt pavements and can be loaded with water tanks for motorized cutting operations with water. This machine is mainly used for cutting concrete, cement, floor, and stone pavement; cutting pavement shrinkage joints or damaged pavement, its operation is simple, and it is more convenient in the condition of no power supply.
Features of Saw Cutting Machine
The gasoline pavement slitting machine is simple in structure, light in weight, straight in slitting, high in work efficiency and easy to use. This gasoline pavement slitting machine adopts manual walking cutting and feeding. A diamond saw blade is installed on the main shaft of the head of the road-cutting machine, and the saw head is driven by a motor through a V-belt. A hand wheel with adjustable cutting depth is installed in front of the handlebar, and the front walking wheel can be raised and lowered by turning the hand wheel to adjust the height of the saw blade. There is a water tank on the upper part of the machine body of the road-cutting machine. Before cutting the saw blade, the switch of the water pipe should be turned on, so that the pipe head sprays water on both sides of the saw blade to cool and remove the sludge from the cutting seam.
The operation method of Saw Cutting Machine
1. Preparation:
(1) Wear safe and qualified earplugs, goggles, helmets, and masks.
(2) Check the installation of the machine, whether the rotation direction of the saw blade is consistent with the direction marked on the protective cover, and whether the protective cover is installed.
(3) Confirm that the water tank is full of water, confirm that it is full of fuel, and check the oil level before working.
2. Start:
(1) Turn off the faucet (through the main gate or the water tank to fill it up).
(2) Draw a line where a cut must be made.
(3) Adjust the position of the machine so that the lower front guide wheel and the saw blade are aligned with the marked line (the saw blade can be seen on the belt side of the box).
(4) Start the engine to warm up the engine.
(5) Turn on the water supply switch and turn on the speed of the motor to the maximum.
(6) Hold the chainsaw, rotate the handwheel, and touch the blade to the ground.
(7) Reduce the required cutting depth, remember that each scale corresponds to a depth of 1cm, and reduce slowly to avoid engine stall.
8. Gently move the machine forward to ensure that the front guide wheel and saw blade are always aligned with the marked line.
